Elsner Corlo Touch KNX 70258 Installation And Operation Manual Download Page 72

Page: 72 / 144

System settings via touch display

Display Corlo Touch KNX

• Status: 09.03.2017 • Technical changes and errors reserved.

Confirm with

to save and return to the previous menu selection.

Or cancel using the

skip back arrow

or the

house button

3.10. Service

In the service menu, you can

•

Reset the access code

•

reset the system to the status of the last ETS download

•

reset the device software

•

allocate a device address (PRG-LED on)

•

call up information about the device (software versions)

•

read the license text

•

access the internal area (manufacturer service only)

3.10.1.Reset the access code

All codes may be reset to the level of the last ETS download via the menu.



Settings > system > service > reset access code

3.10.2.Reset the system to the status of the last

ETS download

All settings modified manually on the display are irrevocably overwritten when the
system is reset!



Settings > system > service > reset to last ETS download

3.10.3.Device reset

This option causes a restart of the device software.



Settings > system > service > reset

Switch the flashing display background
lighting in case of alarm

OFF

Summary of Contents for Corlo Touch KNX 70258

















































































































































Search results

Summary of Contents for Corlo Touch KNX 70258

Reviews:

Related manuals for Corlo Touch KNX 70258

Brands by name

Popular brands

Elsner Corlo Touch KNX 70258, Installation And Operation Manual

Search results

Summary of Contents for Corlo Touch KNX 70258

Reviews:

Related manuals for Corlo Touch KNX 70258

Brands by name

Popular brands