29
Operation
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
2.5.
Slide show
The picture files must fulfil the following requirements:
•
The files must be saved in the top directory level on the card (master directory)
•
File format: Bitmap (BMP, without RLE compression), Jpeg (JPG), GIF or PNG
(without transparency)
•
For pictures with a page ratio other than 16:10, black bars are added to the top
and bottom or left and right. The display has a resolution of 1280 × 800 pixels
•
Colour intensity 24 bit or 16 bit
If picture data is saved on the card, the "Slide show" button is displayed on the right of
the upper menu bar, with which you can directly start it. The image changes approx.
every 5 seconds (for images with 24-bit colour intensity). To interrupt the slide show,
touch the screen or remove the SD card.
The
CasaConnect KNX
can display digitally saved picture data as a
slide show. The picture data for this must be saved on an SD card.
The card socket is located on the right-hand side of the device. The SD
card is pushed into the slot, until it clicks into place.
To remove, briefly press the card into the socket so that is jumps out.
