27
Operation
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Access via the App to the control center can be password-protected or completely pre-
vented.
System > System settings> Access codes
Access code
If you want to operate the control center and your building technology when on-the-
go, then use the
CasaConnect KNX App
and set up a secure VPN connection to your
building network. App access via VPN only works after the App has been used once in
the internal WLAN. IP address assignment should be set in the internet router for DHCP
so that the same IP address is always assigned.
If two
CasaConnect KNX
control centers are installed in the building, they must be
connected to different WLAN networks so that App control is possible.
2.3.4. Navigate in the system menu
All settings for motors and devices for automatic mode and the control center are
changed in the system menu, which you reach via the
system
button. The menu can
be protected with a password, see 5.3.3. Access code, Page 96.
You can make the following settings in three menus:
System setting:
•
Settings:
Change individual data such as time/date and time zone and match
the screen display to your personal preferences
•
Service:
Restart the control center, reset to factory settings, change internal
settings and start remote maintenance
•
Access code:
Set an access code that protects the "Set screen" and "Set
automatic" menus from unauthorised changed.
