16
Operation
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
2.1.
Start page
With the
CasaConnect KNX Control Center
you can centrally operate the technol-
ogy connected via the KNX bus, e.g. raise and lower shades, switch devices on and off,
and dim lights. All basic and automatic settings are also shown on the display after the
basic configuration has been set in the ETS.
Top menu bar:
The internet browser (
Open website
) and
Volume
can be reached at any time via the
top menu bar. Time and date are displayed. Clicking the alarm icon displays the last
active alarm messages. In addition, the start button for the slide show appears here as
soon as an SD card with pictures is loaded.
Menu left links (start menu):
In the menu on the left-hand side you can see the
System
menu, via which you can
reach all basic and automatic settings.
Via the
Manual
menu you can set the position and condition for the motors and devices
configured in the ETS.
In the
Safety module
the alarm system can be switched on or off, open alarms are dis-
played and the last 64 events in the event memory can be viewed.
In the
Presence simulation
menu, the simulation is switched on or off.
The selected
Favourites
for the manual operation and the websites saved as
Book-
marks
are displayed here.
Bottom navigation menu
Display
and
Setting
range
Top menu bar
Menu
