10
Description
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Control possibilities
The following motors and devices in the
KNX system
can be controlled by the
Casa-
Connect KNX
:
Function block A (for motors or lights):
•
Awnings
•
Blinds
•
Shutters
•
Windows and sliding roofs
•
Lighting
•
Dimmers
•
Fans
Function block C (for temperature regulator):
•
Temperature regulators
The following information and commands from the KNX system can be included or
represented in the control center:
Function block B (for connecting control and display elements, sensors and
alarms):
•
Key commands
•
Status of window/door contacts
•
Motion detector
•
Smoke warning
•
Other alarm messages such as water leaks
•
Temperature, floating point...
Automatic functions of the motors and devices
Automatic functions for windows/sliding roofs:
•
Open from a selectable indoor temperature
•
Open from a selectable indoor humidity
•
Open according to the CO
2
content of the room (only with CO
2
sensor)
•
Open according to the VOC content of the room (only with VOC sensor)
•
Close when the supply air temperature is higher than the room temperature
•
Open in steps
•
Open to a specific position (actuation position settable)
•
Night back cooling (settable period)
•
Keep open in a settable period
•
Colour restriction: Limit movement range to selectable position at selectable
outdoor temperature
•
Outdoor temperature lock: Lock below a selectable outdoor temperature
•
Keep closed in a settable period
•
Wind alarm: Close completely or to only provide a gap if a selectable wind
speed is exceeded
