111
Automatic
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
•
Automatic reset
•
Manual switching
It two contradictory automatic functions overlap, the automatic function further down
the list has priority.
Icing-up of rails of the shades:
Be aware that the rails of blinds, awnings and shutters, which are fitted outside, can ice
up. If a motor is then moved, shades and motors can be damaged.
Alarm functions
The alarm functions are applied to shades in manual mode and automatic mode.
Shades are retracted if there is a
frost, wind or rain alarm
and cannot be extended
manually.
Shade settings
The settings are only executed if a blind is in automatic mode and none of the alarm
functions named above is active.
The
outdoor temperature lock
has the highest priority, followed by
timed closing
(extend),
night closing
(extend) and
indoor temperature lock
(keep retracted).
The
Automatic shading according to light intensity
is performed only when the
direction and height of the sun are correct.
Set automatic mode
Light intensity:
Shows the brightness from which shades are deployed. Touch the field to set the shad-
ing.
Set whether the sun protection is extended
never, always or depending on bright-
ness
. In the setting "Never", the sun protection does not react to the brightness and
remains retracted. In the setting "Always", it remains extended. The controls are time
and twilight-dependent, if applicable, and it is also controlled through manual move-
ment.
Default setting: Brightness-dependent.
You set the
light intensity
limit value for the "Brightness-dependent" setting.
Default setting: 40 kLux.
So that the automatic controls react, the light intensity value must be exceeded or un-
dercut for the duration of the delay times. This prevents constant extension and retrac-
