9
Description
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Information about the control center
So that the
CasaConnect KNX Control Center
can be used to its full, envisaged ex-
tent, the following information must be available in the LNX system:
Presence / motion detectors, window contacts, smoke alarms and water leak alarms
can also be integrated into the safety module.
If the
CasaConnect KNX Control Center
is used exclusively to a strongly restricted
extent, without controlling motors (blinds, awnings, shutters, windows), this is also
possible without the information above, e.g. purely time-dependent light controls is
possible.
Information in the KNX system
required
Wind speed
for wind alarm
Precipitation
for rain and frost alarm
Outdoor temperature
for frost alarm
Date and time
for time controls
Outside brightness
for sun protection
Location
Optional for sun protection (manual input possible on
the device)
Wind direction
Optional for facade control if there is a wind alarm
Indoor room temperature
Optional for air-conditioning/air quality
Indoor room humidity
Optional for air-conditioning/air quality
VOC of the indoor air
Optional for air-conditioning/air quality
CO
2
of the indoor air
Optional for air-conditioning/air quality
VOC of the outdoor air
Optional for air-conditioning/air quality
CO
2
of the outdoor air
Optional for air-conditioning/air quality
relative humidity of the out-
door air
Optional for air-conditioning/air quality
absolute humidity of the out-
door air
Value can be displayed but not used for automatic func-
tions
Air pressure of the outside air
Value can be displayed but not used for automatic func-
tions
Colour temperature
Value can be displayed but not used for automatic func-
tions
UV index
Value can be displayed but not used for automatic func-
tions
Heat radiation
Value can be displayed but not used for automatic func-
tions
