101
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Mac address
The MAC address (Media-Access-Control address) is the hardware address of each sin-
gle network adapter and serves as the unique identifier of the device in the network.
This is also called the physical address or device address.
5.3.7. Email message
If you want to send an alarm message by email from the safety module, a valid email
address for sending and at least one recipient address must be entered.
System > System setting > Email message
Email sender address
Email outbox server
Select your email outbox server from the list or enter it (user-defined).
Email address
Enter your email address.
Password
Enter your password to access the email server/provider.
Sent test email
Tap the field to send a test email to your email address.
Email recipient address
Enter up to 16 email addresses, to which the alarm messages can be sent. Alongside
entering the email address using the keypad, you can also send a test email to the en-
tered email address.
5.3.8. Device information
System > System settings > Device information
Check for updates
Shows the currently installed version and facilitates the installation of SD card or the
search for updates on the internet. Follow the download and installation instructions
on the display.
The software for the
CasaConnect KNX Control Center
can be updated during nor-
mal operation. If the control center are connected to the internet, the control center
download updates automatically after confirmation. Alternatively, you load the new
