![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715009.webp)
7
Operating the device via the touch display
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
4.1.3. Button tone
Tap on the loudspeaker symbol to activate or deactivate the button tone.
The button tone is emitted as an acoustic acknowledgement when a touch key is
activated.
4.1.4. Service
Cleaning mode
Touching the "Cleaning mode" menu item switches off the touch function of the screen
for 60 seconds. During this period, the screen can be wiped with a damp cloth. Please
always use this function to clean the touch panel; otherwise, cleaning may trigger or
adjust undesirable functions.
KNX programming mode
As long as programming mode is active, the physical address of the
Fabro KNX
can
be changed in the ETS.
Reset
Executes a reset of the
Fabro KNX Touch Panel
.
Reset to the last ETS download
All settings modified manually on the display are irrevocably overwritten when the
system is reset!
Reset the access code
All codes are reset to the level of the last ETS download via the menu.
Internal area
ATTENTION
Property damage due to incorrect use
of the internal area function!
The internal area is not needed in the normal function of the
touch panel.
The internal area is only needed by the manufacturer's service and offers the option to
change basic properties of the device. The area is protected by an access card.
Device information
The current software version and serial number of the
Fabro KNX
are displayed.
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......