![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715007.webp)
5
Operating the device via the touch display
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
4.
Operating the device via the touch
display
The available display and operating options on the device are dependent on the ETS
settings. Up to 5 pages can be activated there, each with 8 channels.
You can access the individual pages on the display by touching the 5 fields at the bot-
tom edge of the screen.
Other display settings can be adjusted in the ETS in the "Display" and "Button tone"
sections. However, you can also make changes directly on the device using the “Set-
tings” menu at the top right of the display.
Press the
button to move one menu level back, and the
button to access the Start
page.
4.1.
Device settings
The adaptation of display settings on the device is only possible if the "Menu naviga-
tion" has been activated in the ETS setting item "Page X”.
Press the
symbol at the top right-hand side of the display to access the Settings
menu. There, you can do the following:
•
"Settings" display pages
•
switch the button tone on or off
•
Access service functions
4.1.1. Display settings
Tap “Screen” to access the screen settings.
Here you can adjust
•
the display brightness
•
decide if you want the display to switch off and/or switch to the start page if it
has not been touched for a certain period of time.
Screen brightness control
Tap the “Brightness control” to access the display brightness control.
Choose whether the brightness should be defined as a fixed value, based on the
brightness of the room, or by a communication object.
Display brightness
Tap “Brightness” to access the adjustment of the display brightness
.
Choose a brightness level between 1 and 100%.
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......