![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715039.webp)
37
Setting the parameters and functions
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
Safety
6.10. Computer
Activate the multi-functional computer, with which the input data can be changed by
calculation, querying a condition or converting the data point type. The menus for the
further setting of the computer are then displayed.
6.10.1. Computers 1-8
Set, in which cases input values received are to be kept per object. Please note that the
setting "After power restoration and programming" should not be used for the initial
start-up, as the factory settings are always used until the first call (setting via objects is
ignored).
Computer 1/2/3/4/5/6/7/8
No • Yes
The nominal values and delay times
should
• not send
• after restoration of power
• after power restoration and
programming
.
0196
Forward
0197
Back
0198
Loudspeaker
0199
Volume
louder
0200
Volume
quieter
0218
Caution
0219
Key
0220
Intruder
in the house
0221
Intruder
outside the
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......