![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715018.webp)
16
Setting the parameters and functions
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
6.
Setting the parameters and functions
6.1.
Behaviour on power failure/ restoration of
power
Behaviour following a failure of the bus power supply:
The device sends nothing.
Behaviour on bus restoration of power and following programming or reset:
The device sends all outputs according to their send behaviour set in the parameters
with the delays established in the "General settings" parameter block.
6.2.
General settings
Here you can make general settings for the ETS, including the basic properties of data
transmission. A different transmission delay prevents an overload of the bus shortly
after the reset.
6.3.
Display
The start page, screen save, brightness and automatic switch-off may be set for the dis-
play of the
Fabro KNX Touch Panel
. Display settings can be modified via objects, in
the ETS menu or on the display.
Object control
For the display settings via objects, i.e. via the bus, objects 14-18 and 21 are available.
The display object may be activated in the ETS. The following parameters only appear
when the objects are used ("yes").
System language
• Deutsch
• English
• Français
• Italiano
• Español
Device name
Fabro KNX [free text]
Maximum telegram rate
1 • 2 • 5 • 10 • 20 telegrams per second
Transmission delay in seconds after reset/restoration of bus for:
General objects
5 s • 10 s • 30 s • 1 min • … • 2 h
Computer objects
5 s • 10 s • 30 s • 1 min • … • 2 h
Logic objects
5 s • 10 s • 30 s • 1 min • … • 2 h
Use objects for display
No • Yes
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......