19
Remote control set-up
Remote control Remo KNX RF
• Version: 14.02.2018 • Technical changes and errors excepted.
(4) Tap the
Up
or
Down
arrow on the top
Page
field to change between the pages of the
listing.
At the top part of each channel button, you can see the name specified in the ETS — below
the name assigned to the device. The currently selected name is shown in green. On the
right, you can see the channel number in brackets, and under it, the function symbol.
(5) Tap the channel or group that you would like to adjust.
(6) Change the name using the keyboard. If the box ‘Use the name from ETS download’ is
checked, the name entered in the ETS will be used.
Tap
Cancel
to leave the name changing screen without saving. Tap
OK
to save and return
to the channel name overview.
7.2.2. Changing channel order
Changing the display sequence of the channels.
Menu: Wireless channel configuration > Change channel order.
(4) Tap the
Up
or
Down
arrow on the top
Page
field to change between the pages of the
listing.
(5) Tap the channel or group that you would like to move.
(6) As long as the channel/ group is selected, it can be shifted with the
Up
and
Down
arrows
in the
Page
field at the top edge of the screen.
Tap on the channel/group again to confirm the position.
4
5
6
