![background image](http://html1.mh-extra.com/html/elsner-elektronik/70516/70516_installation-and-adjustment_2396645029.webp)
27
Parameter setting
Actuator KNX S1R-BA4-UP 24 V
• Version: 27.05.2020 • Technical changes and errors excepted.
Automatic blocking object:
With the automatic blocking object, the automatic can be deactivated for a short term
(e.g. if present or during speeches in conference rooms).
Here it is also specified in which mode the channel is found when the voltage returns,
i.e. after a power failure. The mode (manual or automatic) is send as a status object to
the bus.
Type of automatic:
The automatic for the connected drive can be specified externally, however all the
settings can also be configured internally. If "internal automatic" is chosen, a separate
menu item "Automatic" (see chapter
, page 30 or
, page 36) appears.
Block – blocking objects
The menu item only appears if a block with blocking object was configured for
"control". Here it is specified was happens for object value 1 and 0. Via the free blocking
object, a fire alarm scenario may be configured for example (create escape routes by
retracting the shading, smoke extraction via windows). This can prevent being locked
out on the patio (opened window contact of the patio door blocks the shutter in front
of the door).
Use automatic blocking object
no • yes
Operating mode after power returns
• Automatic
• Manual
Send status object
• 1 for automatic | 0 for manual
• 0 for automatic | 1 for manual
Send delay of the status output
Automatic or Manual in 0.1 sec
0...50
Type of automatic
external automatic • internal automatic
Designation
[Block 1 ... 5]
Enter a designation here!
If blocking object has value =1
• no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Position in % (only if by using a block, a
specific position is achieved)
0...100
Slat position in % (only if by using a block,
a specific shutter position is achieved)
0...100
If blocking object has value =0
Summary of Contents for 70516
Page 2: ......