![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633012.webp)
11
Description
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
•
Fan module RF-VM for connecting fans/circulating air heating units from other
manufacturers
•
RF relay (radio relay, On/Off)
•
RF MSG (radio motor control device, Up/Down)
The following
additional options
are available:
•
Connection of up to 10 external Up/Down wall buttons for manual operation of
drives and devices on the spot
•
Connection of up to 2 video cameras via an optional camera interface
The followingfunctions are available with
WS1000 Color
only:
•
Presentation of a slideshow on SD card, data storage on SD card
•
Communication with the KNX bus system via an optional KNX interface
1.2.1. Automatic functions in overview
Devices connected via the
“Dimmer” output
(e.g. lighting) have no automatic func-
tions. They can however be operated manually via the display.
Sliding doors
also have no automatic functions. They can be fitted with a close-con-
tact (to a multifunctional input) and be manually operated via the display.
Automatic functions for windows/sliding roofs:
•
Opening above a selectable indoor temperature (can be switched off)
•
Opening above a selectable air humidity level in the room (can be switched off)
•
Close when the supply air temperature is higher than the room temperature
(can be switched off)
•
Night-time re-cooling (settable running times)
•
Daily forced closure (settable running times)
•
Outdoor temperature block: Block beneath a selectable outdoor temperature
(can be switched off)
•
Keep closed in a period which can be set
•
Frost alarm: Close in case of precipitation beneath a selectable outdoor
temperature (can be switched off)
•
Wind alarm: Close when a selectable wind speed is exceeded (can be switched
off)
•
Rain alarm: Close when there is precipitation or move to a gap (can be switched
off)
•
Closing when cooling/air-conditioning unit is active
If a motion detector is connected, windows will be closed automatically when a break-
in alarm is triggered. If a smoke detector is connected, windows will be opened auto-
matically when a fire alarm is triggered.
Step windows will be opened step-by-step. An opening position can be set for sliding
windows.
Summary of Contents for 60121
Page 7: ...6 Clarification of signs ...