|
Configuration and management
31
|
ELSA LANCOM Wireless L-II
|
EN
3
Configuration and management
It will nevertheless be necessary for you to add some information and
configure the router to your specific needs. These settings are made as part
of the configuration process.
This section will show you the programs and routes you can use to access the
device and set it up.
And, if the team at ELSA has produced new firmware with new features for
your use, we will show you how to load the new software.
3.1
Radio or wired: Configuration approaches
Using a configuration via the network allows any computer on the WLAN or
LAN to access the access point. However, you can restrict or block the access
altogether by using the IP access list.
The configuration of
ELSA LANCOM Wireless L-11
requires the use of either
ELSA LANconfig
for Windows,
ELSA WEBconfig
or Telnet (supplied with
most operating systems).
ELSA LANconfig
is supplied with your device. You
can always obtain up-to-date releases from our online media.
3.2
Configuration using
ELSA LANconfig
Start
ELSA LANconfig
e.g. via the Windows taskbar with
Start
Programs
ELSAlan
ELSA LANconfig
ELSA LANconfig
searches the local area
network for devices.
Just click on the
Browse
button or call up the command with
Device
Find
to initiate a search for a new device manually.
ELSA LANconfig
will
then prompt for a location to search. You will only need to specify the local
area network if using the inband solution, and then you're off.
100235 Wireless L-11.book Seite 31 Montag, 30. Oktober 2000 5:43 17
