|
Installation
25
|
ELSA LANCOM Wireless IL-II
|
EN
Checking the IP configuration
Under Windows NT 4.0 you can query the current IP configuration of your
computer with
Start
Run
ipconfig
. This shows you which IP
address was assigned to the computer by the DHCP server and which
addresses have been specified for the gateway (not for the DNS server).
2.3.3
Windows 2000
With Windows 2000, helpful hardware setup wizards provide support when
you install the new hardware. If your network card is not detected during sys-
tem startup, launch the hardware wizard by selecting
Start
Settings
Control Panel
Add/Remove Hardware.
햲
Select to search for new hardware and then select the 'Add a new device'
from the list that follows and click
Next >
.
햳
The search should detect the network card. Click again
Next >
. The sys-
tem then configures the new hardware and a LAN connection.
햴
To verify the new LAN connection, open its window by selecting
Start
Settings
Network and Dialup Connections
From there, click the connection with the right mouse button and open its
properties.
100324 Wireless IL-11.book Seite 25 Montag, 30. Oktober 2000 4:13 16
