Installation
ELSA LANCOM DSL/10 Office
8
Software installation
The
ELSA LANconfig
configuration software for Windows operating systems enable you
to set up your router easily and conveniently for the desired application.
You will need a PC on the LAN to run the configuration software.
Install the TCP/IP network protocol on the computer that will be used to set up the
access point.
Then install
ELSA LANconfig
. If the setup program does not start up automatically
after insertion of the
ELSA LANCOM
CD, start Windows Explorer, click on
'autorun.exe' on the CD
ELSA LANCOM
and follow the instructions in the install
program.
Basic configuration
The IP address for the access point is set during the basic configuration. In addition, the
decision on whether to use the integrated DHCP server is made. You can run the basic
configuration with
ELSA LANconfig
or with telnet.
Make basic settings with
ELSA LANconfig
The first time
ELSA LANconfig
is run, the new access point is detected on the TCP/
IP network and can immediately be configured. A wizard is automatically started to help
you with the basic settings of the device or it can even the complete setup itself.
Start the new software with
Start
-
Programs
-
ELSAlan
-
ELSA LANconfig
.
