ELSA LANCOM Business 6000, Manual

Page: 91 / 174

|
Operating modes and functions
91
|
ELSA LANCOM Business 6000
|
EN
Layer-3
Layer-3 protocol for the connection. Recognized automatically in the case
of some incoming connections.
An additional entry is required in the PPP list when using PPP.
An additional entry is required in the scripts list when using scripts.
Layer-2
Layer-2 protocol for the connection.
Options
Enables data compression and channel bundling. These options are only
effective when supported by the protocols of layer 2 and layer 3.
Layer-1
Layer-1 protocol for the connection. Recognized automatically in the case
of some incoming connections.
6.8.6 Round-robin list
The round-robin list in the ELSA LANconfig can be found in the
'Communication' configuration section on the 'Remote sites' tab, or under
/Setup/WAN-module/RoundRobin-list
during Telnet or terminal
sessions.
If a remote site can be reached using several numbers, enter the first number
in the name list and the rest in the round-robin list.
Remote site
Name of the remote station as specified before in the name list.
RoundRobin
Additional numbers for this remote site. Multiple numbers are separated
by hyphens.
Begin with:
Indicate whether a new call establishment should start with the last
successfully used number, or always with the first number of the list.
6.8.7 Channel list
The channel list in the ELSA LANconfig can be found in the 'Communication'
configuration section on the 'Remote Sites' tab, or under
/Setup/WAN-
module/Channel-list
during Telnet or terminal sessions.