ELSA LANCOM Business 6000, Manual

Page: 80 / 174

Operating modes and functions
|
|
ELSA LANCOM Business 6000
|
80
EN
cd /Setup/NetBIOS-module/Remote-table
set nhamel.ras workstation
Be sure to identify this entry as an 'individual station' to ensure that this
remote station is not automatically contacted when the NetBIOS module is
switched on.
햵
If the NetBIOS link uses a PPP connection, check the PPP list for the
activation of NetBIOS for the corresponding entry.
6.6.6 Search and find: the Network Neighborhood
Once the participants have all been prepared for NetBIOS routing, it's time to
launch Windows Networking.
NetBIOS routing via LAN-LAN coupling
Once the NetBIOS modules have been activated and the networks have
exchanged their information regarding the available workstations, a list of
these computer names is now available in the
ELSA LANCOM Business .
Using Telnet, enter
dir /Setup/NetBIOS-module/Host-list
to call up the list of currently available workstations, which could look like the
following:
Name Type IP address Remote station Timeout Flags
DOKUNOTEBOOK 00 10.10.0.53 NHAMEL.MOBIL 4939 0020
DOKUNOTEBOOK 20 10.10.0.53 NHAMEL.MOBIL 4939 0020
ELSA 1d 10.10.0.53 NHAMEL.MOBIL 4939 0020
ELSA.DOKU 1d 10.1.253.246 4935 0000
ELSA.DOKU 1d 192.168.100.162 4997 0000
NHAMEL.MOBIL 00 10.10.0.1 NHAMEL.MOBIL 0 0020