|
Technical data
31
|
ELSA GLADIAC
|
EN
Technical data
Those with a technical interest will find more detailed information regarding
the
ELSA GLADIAC
in this chapter. All interfaces and their assignments are
described in detail.
Characteristics of the graphics board
ELSA graphics board addresses
The ELSA graphics boards are 100% IBM VGA compatible and occupy the
same memory area and specific addresses in the I/O range. The memory
range above 1 MB is automatically assigned through the PCI BIOS interface.
If you come across any address conflicts, try to modify the I/O address of the
expansion board causing the conflict. The addresses of the ELSA graphics
boards cannot be changed! The ELSA graphics board also requires an
interrupt (IRQ) which is free. This may have to be reserved in the computer’s
BIOS. For help with this theme, refer to the manual for your mainboard.
To ensure that your system functions properly, the addresses and ranges
occupied by the ELSA graphics board must not be accessed simultaneously
by other hardware components. The following addresses are assigned:
쎲
I/O addresses:
Standard VGA I/O (3B0-3DF)
쎲
Memory addresses:
Video RAM (A0000-BFFFF)
Video BIOS-ROM (C0000-C7FFF)
ELSA Gladiac
Graphics processor
GeForce 2 GTS by NVIDIA
RAMDAC pixel timing
350 MHz
On-board memory
32 or 64-MB DDR RAM
BIOS
Flash BIOS with VBE 3.0 support
Bus system
AGP 2.0
VESA DDC
DDC2B
21663_DE_0300.book Seite 31 Montag, 10. April 2000 12:22 12