|
Technical data
27
|
ELSA GLADIAC 5II
|
EN
5.3.3
ELSA GLADIAC 511DVI
5.3.4
The VGA D-shell socket
Pin assignments
The
ELSA GLADIAC 511
issues analog signals in accordance with the
requirements of directive RS-170. The synchronization information is sent
separately. If your monitor supports the switching of input impedance, the '75
Ohm' setting (= '75
Ω
') should be chosen for the R, G and B video inputs and
the '2 kOhm' setting (= '2k
Ω
') should be set for the sync inputs. You should
not try other switch settings at the sync inputs unless your monitor expects a
sync level that differs from that of most common monitors and does not
DVI socket
combined digital/analog connector
socket for the monitor
(29 pin)
VGA D-shell socket
connector socket for monitor
(15 pin)
Pin
Signal
Pin
Signal
1
red
9
+5V
2
green
10
sync ground
3
blue
11
not assigned
4
not assigned
12
bidirectional data (SDA, DDC2)
5
ground
13
horizontal synchronization
6
red ground
14
vertical synchronization
7
green ground
15
data clock (SCL, DDC2)
8
blue ground
