ELSA ECOMO 340, Manual, Page: 11 / 30

|
Installation
11
|
ELSA ECOMO 340
|
EN
3 Installation
The installation of the ELSA ECOMO 340 is a two-part process:
the connection of the LCD monitor to your PC
the installation of the drivers under Windows
3.1 Connecting the LCD monitor
When removing connector cables from your PC, always pull on the plug rather
than on the cable to prevent damage to the cable.
햲
Make sure that your computer is switched off.
햳
Connect the monitor to the computer. You can connect the ELSA
ECOMO 340 to any regular VGA port using the VGA signal cable
쐃
.
Secure the connector to the PC.
햴
Connect the end of the power cord
쐇
to the connection at the back of the
monitor and then plug the cord into the outlet
쐋
.
햵
Switch on the monitor at the power switch
쐏
.
햶
Switch the computer on.
쐃 쐋
쐇
ELSA ECOMO 340
PC
쐏