ELSA ECOMO 117LCD, User Manual, Page: 13 / 42

Unpacking and Connecting
ELSA ECOMO 117LCD
7
Connection to the Computer
The ECOMO 117LCD can be connected to any computer with a VGA-compatible graphics
board using the supplied video signal cable. It can also process all analog RGB signals
that "normal" tube-based monitors support. Apple Macintosh graphics boards and most
graphics boards from other manufacturers can be connected by means of a corresponding
adapter.
Connection to an IBM-compatible System
햲
First, ensure that the monitor and the computer are switched off.
햳
Connect the 15-pin connector on the video signal cable to the corresponding socket
on the computer's graphics board.
햴
Switch on the computer first and then the monitor. Conversely - when you have
completed your work– switch off the monitor first and then the computer.
Connection to a Macintosh System
Proceed in the same way for a Macintosh computer. However, you require a special
ELSA adapter. Place this adapter between the connector on the graphics board and the
connector on the video signal cable.
Chapter 13, 'Registration and Configuration' will tell you what to do next.
View of the 15-pin connector
on the video signal cable.
Connection to the port on a
Macintosh computer
View of the 15-pin
connector on the video
signal cable.