1
Wireless Key (HIS20USB)
Installation and Operating Instructions
I. Function
Overview:
1. OS: Windows XP / Windows 7
2. Minimum system requirements:
CPU: Core 2 Duo
RAM: 2G
HD: 20GB (requires at least 20G of space
available on your PC’s hard drive to install the
drivers, Microsoft .Net Framework and HIS PC
software)
3. USB 1.0/1.1/2.0 compatible.
4. RF supported: 868.35 Mhz
5. Once the system is activated, it will be
automatically linked to HIS20USB (Wireless
key).
6. Accessible and configurable Home Box
settings include:
1. Scene: Scenario settings
Supports up to 16 scenarios.
2. Event:
Event
settings
Supports up to 32 events.
3. Schedule: Schedule settings
Supports up to 32 schedules.
4. Event Log: Browse Home Box event log.
Supports up to 100 events.
5. Gateway Setup: Gateway setting
1.GSM: Settings for the currently
supported GSM Gateways.
2.SMS: Configure the content of SMS
notification to be sent when the alarm
has been triggered.
6. Device
Setup:
1.868 MHz Security Device:
(1)Remote / Sensor: for security TX
devices; supports up to 32 wireless
devices and 4 wired security devices
including PIR / Magnetic / Remote /
Keypad / Flood / Smoke and so forth.
(2)Control: For security enhancement
devices; supports configurations for up
to 12 devices including Wireless Key /
GSM Gateway and so forth.
2.433 MHz Green Device
(1)Remote / Sensor: for Home
Automation TX devices; supports
configurations for up to 32 devices
including PIR / Wall Switch and so
forth.
(2)Control: for Home Automation RX
devices; supports configurations for up
to 32 devices including Plug / Dimmer
/ Curtain Switch / Camera / Lighting
and so forth.
7. System
Setup:
1.
User: User settings; supports up
to 8 user settings.
2.
Alarm Level: Alarm level settings.
3. Notifications: Phone number
settings; supports up to 6 groups
of phone numbers.
4.
Dial: Dialing related settings.
5.
Siren: Siren DIP Switch settings.
6.
Time & Languages: Home Box
time and PC software language
settings.
7.
Monitor Center: Monitor Center
settings.
8.
Home Box: Home Box settings.
II. Instructions for installation:
Connect HIS20USB (Wireless key) to your PC’s USB
port after you have installed its driver. The installation
process is described as follows:
2-1. To install the Wireless key driver (PL-2303
USB-to-Serial), run Step1_HIS20USB
Driver\PL2303_Prolific_DriverInstaller_v10518.exe