elrest eVISIO PTE715, Device Description

Page: 16 / 43

Device description elrest Automationssysteme GmbH
e VISIO PTE715_Windows.EN Page: 16
2.1.5 Required space
With assembly in a switch cupboard, please ensure sufficient access to the device for the operator and
maintenance work.
Ensure a minimum distance of 80 mm from the back and circumferentially 50 mm.
Care must be taken for sufficient air ventilation.
Figure 1: Required space
2.1.6 Mounting
For easy front mounting, springs are mounted in the housing.
With the springs can can be placed the device in the cutout and subsequently fixed in the mounting opening
with the clamping blocks
The spring clip mounting is not suitable for protection class IP54. Therefore, terminal blocks are required as
an additional attachment for retrofitting and maintaining the IP54 requirement. (see chapter
„Dimension
Drawing“ )
2.1.6.1 Number of the terminal blocks
Figure 2: Symbolic illustration
Terminal block for mounting
PTE715 aluminium: 10 terminal blocks
1 x MB225-3 set of terminal blocks (6 pieces)
1 x MB225-8 set of terminal blocks (4 pieces)
50 mm
80 mm
50 mm
50 mm