Device description
elrest
Automationssysteme GmbH
e
VISIO PTE715_Windows.EN
Page: 13
1.10.1
Intended use
The devices are intended for the use in the ranges of the regulation, control and automatic control
engineering.
Within all ranges, particularly when using inductive loads (e.g. engines and relay etc.), it must be
guaranteed that arising voltage peaks don’t exceed the maximum input voltages of the entrances and
exits. If necessary, external predecting circuit parts must be installed.
The devices are exclusively intended for the installation in machines and plants. Start-up is forbidden until
the conformity of the final product with the guideline 2006/42/EG „machine guideline “is determined.
With certain devices, external measures (e.g. a special power supply) can be necessary, in order to
achieve the requiered interference immunity against surge). In this case, it will be pointed out at the
respective device.
It will be applied accordingly to the appropriate device, if external measures are necessary for the
minimization of the radiated interference.
Further the environment can affect the radiated interference.
Fulfils a device
the “higher” engineer standards (e.g.
EN 61000-6-3:2007 generic standard emission: Living
quarters, business and industrial areas and small enterprises),
it will be applied accordingly to the
appropriate device
(see to chapter „data sheets “).
WARNING
Warning!
This is a Class A product. In a domestic environment, it may cause radio interference, in
which case the user may be required to take adequate measures.
Designates a possibly arising danger, which can lead to a damage to property or person
1.10.2
Structure of the visio terminal
•
Matal housing, glass
•
Front panel mounting
•
Connections via plug connection
1.10.3
Configuration
Ethernet communication level is available.
The selected configuration of the hardware must be accorded to the setting of the peripheral
components. Malfunctions may otherwise occur, if no safty prompts are programmed in the application.
Visio components can only be (dis-)connected to the system in the
„
power-off state
“
of all
system components.
