Elproma NTS-pico3, User Manual

Page: 17 / 30

17
Monitoring GNSS satellite signals ON-LINE
SSH communication must be enabled first. Please execute the following commands from
terminal:
ssh root@192.168.1.234 -p 65535
root@192.168.1.139's password: 12345
[root@rbmtx ~]# TERM=vt220
[root@rbmtx ~]# gpsmon
GPSmon tool let you trace satellite signals on-line
This screen is the tool to monitor GNSS (GPS & Glonass) satellite signal performance. You
should be able to receive signals from at least not less than 4 satellites. Well done installation
mostly let view 10-20 GNSS satellites in view. It takes approx. 5-10 minutes since power on to get
minimum #sats in view.
Recommendation!
For Linux/Unix and Mac OSX please use BASH std. terminal.
For Microsoft Windows there are various of 3
rd
party SSH software suppliers. One of the most popular one is free
available putty.exe