15
Basic SETUP
Go to your web browser and put IP address 192.168.1.234 (netmask 255.255.255.0). You
will be asked for username and password. By defaults they are:
Username:
admin
Password:
12345
IP addressing
On LAN configuration page you can find essential parameters needed for LAN connection.
Here you can set IPv4 address, netmask, default gateway and DHCP server.
Minimum configuration requires setup IPv4
IMPORTANT NOTE!
For time synchronization purpose please do not use DHCP/DNS.
You will need to keep SSH communication ON for GNSS signals tracing. Also, devices
synchronizing to NTS-pico3 may assume it has statis IP address.
