ELPRO TZM1612 Manual Download Page 3

 
 

Physical connection must be afforded using a cable according to the diagram below: 

 

 

 

WARNING 

In the case of several units connected in a  daisy chain, 

the 100 Ohm termination must be placed on the last unit 

 
 

 

1.0 OVERVIEW

  

Thank you for purchasing this product. Check the contents of the packaging carefully.  
It contains: 

 

TZM1612                               

16x12 RGBHV & AUDIO MATRIX  

TZM1612                              

16x12 RGBHV & AUDIO MATRIX  

 

The TZM1612 unit

 

- This handbook and  
   the certificate of conformity.

 

 

- The infrared remote   
    control (OPTIONAL). 

 The main 

cable

 

The TZM 1612 is a 16X12 matrix per RGBHV signals plus associated audio. 

 

The possibility of programming output 12 as preview promotes extremely versatile use  of the 
matrix in certain multi-media applications. 

 

The matrix can also process Y, Cb, Cr signals. 

 

The possibility of saving and recalling 8 configurations via the keypad, serial line or IR remote 
control makes the TZM1612 highly versatile in presentation environments. 

 

The TZM1612 features through blank switching mode. 

 

The switching time is user-selectable to adapt more precisely to the characteristics of the 
destination. 

 

This solution makes it possible to avoid the annoying effects that are typical of LCD devices 
when a signal is switched at their input. 

ELPRO Video Labs s.r.l. 
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY 
Tel.+39 0119348778 - FAX +39 0119348779

 

ELPRO Video Labs s.r.l. 

Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY 

Tel.+39 0119348778 - FAX +39 0119348779

 

18 3 

Summary of Contents for TZM1612





















Reviews: