User Manual
Condor 415U-1-Cx Battery Powered Wireless IO
Version 1.4
15
Click OK and hit enter on the keyboard and you should see 415U-1-Cx login menu as below.
Select option a) Engineer to login with
Engineer access and enter default password “Elproeng”
.
You should see the main menu displayed as below however there may be some slight menu
differences due to model and firmware variations.
Quick Start Guide
Below is a QuickStart guide for connecting a 415U-1-Cx Lower Power I/O radio to a 415U-2-Cx-C
Condor Radio.
Connect to the 415U-1-Cx Terminal menu and navigating to the Unit config (a) and from here you will
need to configure the Network and Radio parameters to match the configuration of the 415U-2-Cx
Access Point. Go through the Network and Radio config selections, and match the parameters shown
below from the 415U-2-Cx AP.
Below is guide that shows the correlation between parameters.
First ensure the 415U-2-Cx firmware version is a least V2.31 or higher.
