User manual & technical documentation – LDC-Q – EN – Rev 1.1 - 20022018
5
Safety regulations
•
The operating personnel must be
familiar with the contents of this
manual and be able to carry out all
instructions given.
•
The manual must be available at all
times to the personnel operating the
installation.
•
The electrical cabinet must be closed
at all times and may be opened by
authorised persons only.
•
The installation is designed to
operate in a frost-free environment.
If the system freezes up, its
functionality must be thoroughly
checked.
•
Safety items including safety gloves,
clothing, goggles, etc., must always
be available for the operating and
maintenance personnel.
•
It is strictly forbidden to smoke, eat
or drink while operating and/or
carrying out maintenance on the
installation.
•
Incorrect operation and use of the
installation may cause damage to the
system.
•
Do not use the installation after it
has been damaged. Have it inspected
by an authorised machine engineer
and repaired when necessary.
The transfer, (re)location and
initial commissioning of the
installation must be carefully
carried out. Transfer, locating or initial
commissioning that is incorrectly carried
out can be dangerous for both people
and the environment. Expert installation
and operation are conditions for a
trouble-free operation.
Each product manufactured by
Elpress BV, only leaves the
factory after having been
tested. If the equipment is not going to
be installed immediately, it should be
stored in a dry and frost-free area that is
suitable for its design
structure.
The LDC-Q starts up automatically. The
installation can start up unexpectedly.
Radiated airborne noise emission
•
Maximum measured noise level A -
weighted to noise pressure at a
distance of 1 metre from the
installation: <79 dB, with 11 kW
pump.
•
From 80 dB(A), the employer must
provide hearing protection aids.
•
From 85dB(A) the employee is
obliged to wear hearing protection
aids.
Summary of Contents for LDC-Q
