Elpress LDC-Q, User Manual

Page: 19 / 36

User manual & technical documentation – LDC-Q – EN – Rev 1.1 - 20022018
19
coupling nut from the suction hose, then unscrew the restriction [23] and clean the
hole. Reinstall the parts again afterwards.
•
If water is leaking into the jerry can, the non-return valve [22] is dirty or damaged.
Unscrew the non-return valve and restriction out of the block and pull them apart as
shown in the drawing
[24] . Clean the parts and check them for damage. If there is
no damage evident, the non-return valve can be replaced in the block. If damage is
found, install a new non-return valve.
•
Regularly check the nozzles, hoses and spray guns for wear.
24