User manual & technical documentation – LDC-Q – EN – Rev 1.1 - 20022018
16
•
The electric switchboard can be closed off. This must remain closed at all times and
may only be opened by authorised persons. He/she must be familiar with the
electrical switchgear and the danger it presents.
•
The installations control panel must never be cleaned with a jet of liquid (e.g. garden
hose or high-pressure cleaner). This could lead to irreversible damage being caused
to the installation.
•
Maintenance may only be carried out when the control panel's main switch is
switched off. The main switch must be locked with a padlock so that it is impossible
to switch on.
•
It should be clearly stated when people are working on the installation.
Cleaning preparations
The switchboard of the installation must never be cleaned with a spray. This
could lead to irreversible damage being caused to the installation.
The following points are important when cleaning the installation:
•
Switch off the main switch and any other electrical supplies.
•
The main switch must be locked using a padlock and it must have a notice stating
that it is forbidden to switch it on.
•
Protective equipment, such as good gloves, safety goggles and face mask are to be
available to the operators at all times.
The installation starts up automatically. The installation can start up
unexpectedly.
The chemicals used can be corrosive and have a caustic action on skin
resulting in serious burns. Caustic substance reacts with metal
(corrosive). Prevent accidents, avoid skin contact and wear safety
clothing.
High pressure water jets should not be directed at electric cabling, control
panels, electrical components and breakable, vulnerable surfaces. People under
the age of 18 are forbidden to spray fluids using high pressure equipment.
Summary of Contents for LDC-Q
