Mainboard User’s Manual
Parallel Port Mode
Use this item to determine the parallel port
mode. You can select Normal, ECP (Extended
Capabilities Port), EPP (Enhanced Parallel
Port), or Bi-Dir.
Parallel Port IRQ
Use this item to assign an IRQ to the parallel
port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port.
Onboard IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Onboard Sound/
Modem
Use these items to enable or disable the
onboard audio/modem chip.
Onboard USB
Function
Enable this item if you plan to use the USB
ports on this mainboard.
USB Function for
DOS
Enable this item if you plan to use the USB
ports on this mainboard in a DOS environment.
IDE Ultra DMA
Support
Use these items to enable or disable the Ultra
DMA function to support the IDE devices.
CPU PnP Setup Page
This page lets you manually or automatically to configure the
mainboard for the CPU.
AMIBIOS SETUP – CPU PnP SETUP
©2000 American Megatrends, Inc. All Rights Reserved
CPU Speed 933 MHz
CPU Base Freq. Auto
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
CPU Speed
Use this item to set the internal clock speed of
your CPU.
CPU Base Freq.
Use this item to sets the external clock
frequency for the CPU. The options include
30
Summary of Contents for M773 Series
Page 4: ...Mainboard User s Manual IV...
