Elpina M773 Series, User Manual

Page: 31 / 43

3: BIOS Setup Utility
Keyboard Power
On
Stroke Keys
Selected
If you enable this item, you can turn the system
on and off by pressing hot keys on the
keyboard. You must enable the Keyboard
Power On jumper in order to use this feature.
Use the item below this one to select the hot
keys to power on the system.
RTC Alarm Power
On If you enable this item you can set an alarm on
the system realtime clock that will resume the
system from a power-saving mode or a
software power down.
RTC Alarm Date /
Hour / Minute /
Second If you have enabled the RTC Alarm Power on,
use these items to set the time and date of the
alarm.
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
system PCI bus, and devices that use the system plug and play
capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S No
Primary Graphics Adapter PCI
Allocate IRQ to PCI VGA Yes
IRQ7 ISA/EISA
ESC : Quit

: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
Plug and Play
Aware O/S
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
98.
Primary Graphics
Adapter
Use this item to define if your primary graphics
adapter is installed in a PCI slot or on an AGP
bus.
Allocate IRQ to
PCI VGA If this item is enabled, an IRQ will be assigned
to the VGA graphics system.
27