Mainboard User’s Manual
Power Management Setup Page
This page sets some of the parameters for the system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Disabled
Video Power Down Mode
Suspend
Standby Time Out
Disabled
Suspend Time Out
Disabled
Throttle Slow Clock Ratio
50%
Modem Ring Power On
Disabled
Lan Card Power On
Disabled
Keyboard Power On
Disabled
Stroke Keys Selected
N/A
RTC Alarm Power On
Disabled
RTC Alarm Date
15
RTC Alarm Hour
12
RTC Alarm Minute
30
RTC Alarm Second
30
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
Power
Management/APM
Use this item to enable or disable the power
management routines. If you enable the power
management, you can use the items below to
set the power management operation.
Video Power Down
Mode
This item defines which power-saving mode is
required to power down the monitor.
Standby Time Out
This sets the timeout for standby mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out
This sets the timeout for suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving suspend mode.
Modem Ring
Power On
If you enable this item, incoming calls to the fax/
modem can resume the system from a power-
saving mode or a software power down.
LAN Card Power
On
If you enable this item, network traffic to the
LAN adapter can resume the system from a
power-saving mode or a software power down.
26
Summary of Contents for M773 Series
Page 4: ...Mainboard User s Manual IV...
