User manual: KIT-NFC-LF/HF-EDGE CONNECT Page 8 of 20
Chapter 3 Getting Started Guide
Easy Tools to Use
OMNIKEY® Workbench Tool is a stand-alone application that allows you to easily diagnose and
configure RFID devices. The application runs on Windows, macOS, and Linux, using the same
graphical user interface on all platforms.
Here's an example of a Windows platform.
•
Find the Workbench Tool tool for the corresponding number of system bits by visiting the linked
website below.
http://www.hidglobal.com/drivers.
Overview
The main window consists of the application menu on the left and the content pane on the right.
The application menu allows you to navigate the application.
List of Available Devices and Diagnostic Options
The RFID devices that PC wants to connect to are shown in the list of card readers below, and
after selecting the devices in the list, you can see all the relevant configuration tabs (blue frame).
The tab contains basic information about the connected smart card reader. All information in this
tab is fixed and cannot be changed. Displays a product image so that you know which device you
are using.
