Elnec BeeHive304, User Manual

Page: 62 / 152

Elnec s. r. o.
62
reference to detailed Device info dialog, available also by menu Device / Device info
reference to Advanced device options - this is available for some types of devices only
Panel Statistics
It contains statistics information about currently selected device.
The information includes
number of successful, failure and total device operations
count-down status indicating number of remaining devices
Statistics and count-down options are available by menu command Device / Device options
/ Statistics or by mouse right click on panel Statistics and select item Statistics from popup
menu
Panel File
The panel is placed on the bottom of PG4UW main window. Panel shows currently loaded file
or project name, size and date.
List of hot keys
<F1> Help Calls Help
<F2> Save Save file
<F3> Load Load a file into the buffer
<F4> Edit Viewing/editing of buffer
<F5> Select/default Target-device selection from 10 last selected devices list
<Alt+F5> Select/manual Target-device selection by typing device/vendor name
<F6> Blank Blank check
<F7> Read Reads device's content into the buffer
<F8> Verify Compares contents of the target device with the buffer
<F9> Program Programs target device
<Alt+Q> Exit without save Terminates the PG4UW
<Alt+X> Exit and save Terminates the PG4UW and saving settings too
<Ctrl+F1> Displays additional information about current device
<Ctrl+F2> Erase Fill's the buffer with a given value
<Ctrl+Shift+F2> Fill's the buffer with random values.
File
Menu File is used for source files manipulation, settings and viewing directory, changes
drives, changes start and finish address of buffer for loading and saving files by binary ,
MOTOROLA , MOS Technology , Intel (extended) HEX , Tektronix, ASCII space , JEDEC ,
and POF format. The menu commands for loading and saving projects are located in this
submenu too.
File / Load
Analyzes file format and loads the data from specified file to the buffer. You can choose the
format desired (
binary , MOTOROLA , MOS Technology , Tektronix , Intel (extended) HEX ,
ASCII space , JEDEC and POF ). The control program stores a last valid mask for file listing.
You can save the mask into the configuration file by command Options / Save options .
The reserved key <F3> will bring out this menu from any menu and any time.