6
BEFORE YOU USE
■
Be sure to use the power cable or the AC adapter supplied with the product. Do not use them
with other products.
■
Be sure to use the AC adapter applicable to your local power specifications. If the product was
sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
■
When storing the product, do not leave it under direct sunlight or by heaters. It may be
discolored, deformed, or damaged.
■
Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations.
Use it under the following environmental conditions:
Temperature: 0°C - 40°C
Humidity: 30% - 85% (No condensation)
■
Use a soft, dry cloth for cleaning.
Do not use any volatile solvent such as thinner or benzene.
■
Luminescent and Black Spots
There may be some pixels that do not properly operate due to the use of CMOS Area Image
Sensors made-up of many pixels.
Though luminescent or black spots may be found on the screen, it is a phenomenon peculiar
to the CMOS Area Image Sensors and is not a malfunction.
■
Follow the guidelines below to prevent the unit from dropping or overturning.
• Use the product on a stable base, desk, or table. Do not place the product on an unstable
base or slanted location.
• Place or wire the product to prevent the power cable, the AC adapter cable or the video
cable from pulling.
■
Carry the product by holding the lower part of the main unit in both hands. Never hold the
product by the column or the camera head.
■
Pay careful attention when using (including setting-up and storing) or transferring the product
to prevent the camera head from receiving any shocks.
■
Be careful not to pinch your fingers when moving the arm or camera head.