Elmo T-350 Instruction Manual Download Page 47

Page: 47 / 81

SELECTING THE DISPLAY MODE

1. Display the

“Main” menu.

Refer to

“Displaying the main menu” (Page42).

Press the MENU button on the remote control or on the control panel.

The main menu will be displayed.

Select the icon

with the

buttons on the remote control or on the
control panel.

Press the

button to execute the selection.

The

“Display mode select” menu will be displayed.

3. Select the display mode with the

buttons on the remote control or on the
control panel.

Selected screen mode is shown by pressing

button.

Press MENU button to return to the main

menu. Turn off the main menu by pressing

the MENU button again.

To set up user mode, please refer to "Setting up User Mode."(Page 49)

Press the

MENU

button to cancel the selection.

Main menu

Display mode select menu

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands