23
Using the protective cover (Sold separately)
The followings are the instructions on how to install and use the protective cover
(Sold separately).
The protective cover can be used as a projection stand as well as a protection cover
for the projector.
How to install the protective cover
①
Attach the supplied the hook and loop
fastener to the bottom of the projector
(marked in red dotted lines).
The hook and
loop fastener
②
Place the projector on the cover as shown
in the below picture.
(Fix the projector with the hook and loop
fastener.)
■
The hook and loop fastener may not be able to maintain its holding
power if there are foreign objects on the attachment surface, such as
dust, water or oil.
Clean the attachment surface before attaching the tape.
The tilt stand cannot be used when the optional cover is attached to the
projector.
Cut the hook and loop fastener and put to avoid covering the tilt stand
when using the tilt stand with the cover. Please note fixing power
decreases accordingly.
N o t e
