Elmo EL55R2 Instruction Manual Download Page 52

Page: 52 / 89

◆

Using on Windows OS

Tap the Screen Mirror icon in the list of apps.

Start the Transcreen app installed on the Windows device.

Select the device name of the product and tap “Start Mirroring”.

The screen of the connected device will be displayed on the display monitor of the
product.

⚫

When installing the app on a Windows computer, use Microsoft Edge.

⚫

You can also check the device name of the product from “Terminal
information” in "Settings".

（⇒

P.78

）

◆

Using on iOS or MacOS

Tap the Screen Mirror icon in the list of apps.

Start Airplay (a screen mirroring app) installed on the iOS device or Mac OS device.

Select the device name of the product.

The screen of the connected device will be displayed on the display monitor of the
product.

Note

Select the device name of the product

Windows screen

Screen Mirror app screen on the Whiteboard

screen

電子黒板画面

Select the device name of
the product

Tap

Airplay

Summary of Contents for EL55R2


























































































Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands

Elmo EL55R2, Instruction Manual

Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands