background image

Camera Control Unit

Operation Manual

MODEL

CC431E

Thank you for purchasing the ELMO camera control unit CC431E. To use the cam-
era properly, carefully read this operation manual before use. After reading the
manual, we suggest you keep it in a convenient place for quick reference.

(1)

Camera control unit (CCU)

(2)

Accessory: Operation manual

NOTE: Camera head, Lens, AC/DC adapter, camera cable and video cable are

option.

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his own expense.

USER-INSTALLER CAUTION:

 Your authority to operate this FCC verified

equipment could be voided if you make changes or modifications not ex-
pressly approved by the party responsible for compliance to Part 15 of the
FCC rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.

INFORMATION

COMPONENTS

Summary of Contents for CC431E





























Reviews: