background image

 

 

Dear user! 

Congratulations, you have acquired an ELMI shaker - product of advanced technology and 
high quality! 

DOS-20L shaker is easy to use and reliable in operation. We ask you to carefully read the user 

manual and observe all maintenance and operation requirements, as this will ensure long and 
flawless use of the device. 

 

The shaker is designed to mix up components in different kind of test tubes, flat bottom laboratory 
dishes, flasks, Petri dishes, etc. 

 

 

Technical specifications 

 

Size of working platform, mm 

415х295 

Speed of rotation,  RPM 

10-300 

Amplitude of platform movement, mm 

20 

Maximum load, kg 

Working  modes 

Type of platform movement 

orbital 

Timer 

 1 minute  

–  9 hours 59 minutes 

Environmental temperature, °C 

+4 up to +45 

Relative moisture of atmosphere (at 20°C temperature) 

not more than 80 % 

Voltage and frequency 

110-220 V, 50-60 Hz 

Power supply adapter: 

24VDC 

– 1A 

Maximal power consumption, W 

24 

Size of the  device, mm 

415х365x100 

Net  weight, kg 

8,8 

 

Delivery package 

 

Item 

Quantity 

Shaker ............................................................................................................................................ 1 
Power supply adapter ..................................................................................................................... 1 
Magnetic clips ................................................................................................................................ 8 
User manual ................................................................................................................................... 1 
Packaging ...................................................................................................................................... 1 

Summary of Contents for DOS-20L
















Reviews: