12
Disinfection and cleaning
Shaker and accessories must be cleaned once a week to avoid corrosion and changes to
material. Disconnect the device from mains power supply and clean it separately. The platform,
accessories and exterior of the shaker should be cleaned with a moist cloth. Only use neutral
agents to clean these parts. To disinfect, use an alcohol-based disinfectant
(70% isopropanol/water mixture). If corrosive, toxic or radioactive liquids or pathogenic bacteria
are spilled on the platform, shaker must be decontaminated thoroughly.
Transportation and storage
To ensure safety during transportation, the equipment should be packed in the original
manufacturer’s packaging or similar packaging substitute.
Equipment can be transported in any kind of closed transport; make sure that equipment is tightly
fixed and transported accordingly to transportation regulations. Equipment should be stored in
original manufacturers packaging in dry room with humidity not more than 80% and temperature
range of +10°C up to +40°C. It is not recommended to store the equipment more than 36 month.
Warranty statements
•
Warranty applies to 24-month period from the date of purchasing.
•
Malfunctions that occur due to a fault of the manufacturer, during warranty period, are
repaired free of charge.
•
Warranty is not valid in the following cases:
- If the serial number label of the manufacturer is damaged.
- If damage occurs as a result of incorrect operation, transportation or storage.
•
These documents are necessary if applying for warranty repair:
- User manual with serial number of the machine.
- Officially signed report, describing the reasons and circumstances of the equipment
malfunctions.
•
Warranty repair can be performed only if the equipment is delivered in the original
manufacturers packaging or equally safe packaging.
•
Before returning for warranty repair ensure that the device is fully cleaned, decontaminated
and does not present any kind of health risk to our staff.
•
If the above warranty requirements are not met, repair charges are applied to the customer.
•
For all further questions concerning usage and maintenance, please contact the manufacturer
or product vendor.
