Ultrasonic cleaning factors
© Elma Schmidbauer GmbH
BA_ES xtra ST_EN_Vers.08.2016
7
3.2
Ultrasonic cleaning process
1. Fill the ultrasonic tank with water and cleaning concentrate
(
Section 6.1
2. Heat up the cleaning liquid, if required for the intended
cleaning application (Section 6.2).
3. Degas the cleaning liquid
– operation in pulse mode at 45
kHz (Section 6.3).
4. Select the cleaning frequency
– 25kHz or 45 kHz depending
on the intended cleaning application (Section 6.4).
5. Activate the operating mode pulse - if required for the
intended cleaning application (Section 6.5).
6. Activate the operating mode dynamic
– if required for the
intended cleaning application (Section
6.6).
7. Switch on the ultrasound (manual or automatic start-up)
(Section 7.1 and Section 7.2).
8. Put the cleaning items into the cleaning bath (Section 7.4.
9. Rinse if necessary (Section 7.5).
10. Dry if necessary (Section 7.5).
