Elma B-Scope 800
22
5.5 Taking a video
1. Set the endoscope as described in
5.4
(1 to 4)
2. Touch the icon
to start video recording.
3. Recording stops by pressing the stop icon
or when
the Maximum video recording time, set in settings has
elapsed.
Note
: Set
Maximum videorecording time
and
Frames per Sec
.
under settings.
The video recordings are automatically saved for subsequent processing.
6 Charging the Battery
The battery should only be removed or replaced by a specialist/specialist workshop.
➢
The battery status icon shows the remaining battery power
➢
If the battery level is too low (a red battery indicator is displayed) it must be charged.
1. Connect the USB cable to the power supply and the "Mini USB" connector on the bottom
of the
Elma B-Scope 800
2. The endoscope turns on automatically.
3. The battery LED flashes green during charging
7 Technical Data
Battery
3.7V/DC, Lithium battery 2600 mAh
Camera:
Front Camera: 1280 x 720 pixels, 6 white LED
Side Camera: 1280 x 720 pixels, 1 white LED
Camera diameter:
5,5 mm
Probe length:
App 1m
Video Frame Rate:
≤ 30 fps
FOV:
68°
Optimum Focus:
4~8 cm
Protection Class:
IP67 (Goose neck only)
Operating Temperature:
0 to 50°C
Storage Temperature:
-20 to 60°C
*Elma Scope
APP
This app is optimized for:
iOS versions
≥ 6.0 og Android versions ≥ 4.0
