Ellisys Bluetooth Explorer 400 User Manual Download Page 17

Page: 17 / 201

lueto

2.3

Front Panel Overview

The front panel of the Bluetooth Explorer 400 Analyzer is shown below:

When attaching an antenna to the front panel, DO NOT over tighten. Screw on
the antenna to a light finger-tight torque only.

Capture Connector

The (Standard SMA) Capture connector is used to connect the antenna (supplied) for capture of
BR/EDR and LE traffic.

Generate Connector

The (Standard SMA) Generate connector is for future implementations (not currently used).

HCI Connectors

The HCI connectors (USB 2.0 Standard-A and Micro-B) are used for USB HCI traffic capture.

Power LED

The Power LED indicates if the unit is correctly powered from the supplied 12VDC/2A power
adapter and connected to the control computer (with USB driver installed).

Constant green:

powered and USB-connected, ready to operate.

Flashing green:

powered but not USB-connected.

Flashing red:

USB-connected but not DC-powered.

Off:

Not DC-powered and not USB-connected. The Power LED may also be off if

when the unit is in power-saving mode after the control computer has been
turned off.

Installing the Application

| 17 of 201

Summary of Contents for Bluetooth Explorer 400










































































































































































































Search results

Summary of Contents for Bluetooth Explorer 400

Reviews:

Brands by name

Popular brands

Ellisys Bluetooth Explorer 400, User Manual

Search results

Summary of Contents for Bluetooth Explorer 400

Reviews:

Brands by name

Popular brands