78/112
WL31/WL31TG
TELEPHONIC TRX
8.68 TELEPHONIC TRX [9]
Menu > Telephonic Transmittor
Authorisation level:
MASTER
,
TECHNICIAN
Purpose
This enables the setting of all the characteristics and parameters relating to the communication to be carried out
through both the PSTN and the GSM telephone lines.
For all the telephone functions the presence of the
STM30 communicator control panel is required.
Sub menu
Fast code
Telephonic TRX - Telephone numbers
90
Telephonic TRX - Voice messages
91
TECHNICIAN code only
Telephonic TRX - SMS messages
92
TECHNICIAN code only
Telephonic TRX - Send type
93
TECHNICIAN code only
Telephonic TRX - PSTN parameters
94
TECHNICIAN code only
Telephonic TRX - Telesurv. code
95
TECHNICIAN code only
Telephonic TRX - PSTN line test
96
TECHNICIAN code only
Telephonic TRX - Cyclic call
97
TECHNICIAN code only
Telephonic TRX - Telesurveillance backup
98
TECHNICIAN code only
Telephonic TRX - Advanced 1
99
TECHNICIAN code only
In case of one or more alarm events, the relating messages are sent to the recorded phone numbers. The sending
can be instantaneous or delayed.
8.69 TELEPHONE NUMBERS [90]
Menu > Telephonic Trx - Telephone numbers
Authorisation level:
MASTER
,
TECHNICIAN
Purpose
This enables the recording of up to 8 telephone numbers, each made of 28 figures or pauses at maximum, to which
the alarm event signalling is sent.
How to do it
:
1. Press the
OK
key and use the
and
keys to choose the telephone number to be programmed.
2. Confirm your choice by pressing the
OK
key.
3. Insert the new telephone number through the keyboard (to insert the pauses, press the
key) and confirm
with the
OK
key.
NOTE: access by Master code will only enable to display the telephone numbers programmed as Voice.
8.70 VOICE MESSAGES [91]
Menu > Telephonic Trx - Voice messages
Authorisation level:
MASTER
,
TECHNICIAN
Purpose
This enables the creation of voice messages which will be sent by the communicator in cases of alarm events.
Each message is made of a basic message and of a message specifically referring to the event.
The basic message must contain all the main information, as shown by the following examples:
“Warning. Alarm signalling in the Rossi house, via Giuseppe Verdi 10, Turin.”
“Warning. Alarm signalling in the office of Notary Bianchi, piazza Canova 1, Rome.”
The specific messages can be as follows:
“Burglary attempt underway”, “Robbery attempt underway”, “Fire starting”, “Person having a painful episode”, etc.
For the voice messages two options are available:
Listen
, which enables the listening of a registered message using the headphone supplied.
Registration
, which enables the re registering of different messages using the headphone supplied. The basic
message can last 10 seconds at maximum, all the others can last 5 seconds at maximum.
